Perforator

Double wall corrugated pipe perforator for making holes on pipes. Perforated corrugated pipes can be used for rain water collection; Number of holes can be customized.

Full line synchronization: operates continuously and auto-adjusts to the linear extrusion speed, eliminating jams and axial stress on the pipe.
Flexible diameter range: efficiently processes pipe sizes from OD 110 mm to OD 200 mm.
Variable perforation patterns: up to 6 slots in a single pipe cross-section with programmable quantity adjustment.
Burr-free clean cut: blade kinematics produce smooth slot edges without burrs or debris, removing the need for post-processing.
Customized service for quantity of circumferential slots and different pipe dimensions.

Contatto entro 24 ore

Specifiche tecniche per linea

Varianti di Perforator in diverse linee di produzione e diametri di tubi

Linea	Configurazione	Diametro del tubo
SL180	Perforatore SL180	ID32–OD200
SL300	SL300 perforator	ID100–OD315

Specifiche Componenti?

Contattaci per specifiche dettagliate, prezzi e opzioni di configurazione per la Perforator.

WhatsApp: +86 187 6563 9190 [email protected]

Preventivo

Usato nelle Linee

Presente nelle seguenti configurazioni Suba Machinery

SL180ID32–OD200

Linea estrusione tubi corrugati SL180

La linea SL180 produce tubi corrugati a doppia parete OD40mm–OD180mm con struttura orizzontale, raffreddamento ad acqua e tecnologia di estrusione per alta velocità di produzione.

6 caratteristicheDettagli

SL300ID100–OD315

Linea estrusione tubi corrugati SL300

La linea SL300 produce tubi corrugati a doppia parete HDPE/PP ID90mm–ID300mm con struttura orizzontale, raffreddamento ad acqua e tecnologia di estrusione per alta velocità.

6 caratteristicheDettagli

Vedi tutto

Attrezzature

Elementi essenziali per la vostra linea. Aggiornamenti, ricambi e configurazioni custom.

Extruder

Suba machinery corrugated pipe extrusion line includes automatic feeding system and hopper with drying function. The developed SJ65, SJ75, SJ90, SJ120, SJ150 extruders use a buffering mixing section and large L/D ratio screws, which has a good plasticization, high output and wide adaptability to raw materials; the feeding section with a spiral buffer design, direct water cooling and automatic temperature control system, which can increase the conveying efficiency at the feeding end. Bimetallic screw and barrel effectively improve the wear resistance and corrosion resistance, service life is increased by 2-3 times; Extruder is equipped with a fine-tuning base to make sure a better connection with the die head; Gearbox adopts vertical structure which achieves compact structure, low noise index, strong carrying capacity and high transmission efficiency; The optimized co-extrusion system of multiple extruders achieves optimal matching production of various specifications. The production of small sized products does not cause waste of the extrusion system, and the production of large sized products has sufficient output.

2 featuresDettagli

Double Layer Die Head

The blank is extruded from the extruder through the inner and outer die of the double layer pipe die head. Double layer pipe die head is suitable for HDPE and PP materials. Die head is fixed on the die head bracket, and die head replacement is simple and quick. Suba die head short channel design (shorten about 25%), effectively lower down the melt pressure, achieves low temperature low pressure extrusion, production efficiency increases 25%; The low extrusion melt pressure reduces requirement of parts, the material leakage risk at the connection is greatly reduced. The double channel starts from the die head body and reaches the die exit, it achieves multi extruders extrude two layers. The optimized design of double layer pipe die head, the inner and outer wall thickness adjustment is very stable and convenient, which achieves dynamic adjustment, no need to stop extruders, no need to loosen any fastening screws, shorten adjustment time and reduce the material leakage risk.

2 featuresDettagli

Corrugator

The innovative corrugator of Suba machinery corrugated pipe extrusion line adopts a horizontal water cooling structure. The vacuum and inflation technology work together to ensure the rapid pipe forming. The center height of different sizes is consistent; Changing sizes only need to replace moulds, no need to adjust the corrugator platform. Patented closed loop water cooling system; Moulds replacement only by loosening or tightening the screws and turning the eccentric disk, there is no any water tubes connected to the moulds, moulds replacement no need to plug and unplug the water tube, 50% time saving for sizes replacement. Corrugator left and right racks are electrically opened and closed freely, which is convenient for equipment inspection and maintenance, and the equipment structure is more stable and easier to operate. Patented mould cooling system, one end of the hose runs continuously and synchronously with the moulds, the other end rotates around the fixed axis. The optimized mould cooling system ensures that the inertia impact of the equipment is minimized, which is especially suitable for high speed production and ensures a longer service life. The length of the moulds cooling water inlet and outlet tube is no longer limited by the specification of moulds, the inlet and outlet tubes are arranged more closely, which avoid equipment damage and the water leakage risk caused by tubes stuck between adjacent moulds.

3 featuresDettagli

Vedi tutto

Pronti a iniziare?

Consulenza e preventivo gratuiti

Consulenza tecnica gratuita

Ingegneri disponibili 24/7

Risposta entro 24h